What it brings
PLA Matte provides a low-gloss finish and straightforward printing. Choose it where appearance, speed and cost matter more than impact tolerance or heat resistance.
Matte general-purpose PLA
PLA Matte
Clean visual finish for fit checks, displays and lightly loaded indoor parts.
PLA Matte provides a low-gloss finish and straightforward printing. Choose it where appearance, speed and cost matter more than impact tolerance or heat resistance.
The engineer’s read.
Match the actual part geometry and service conditions to the grade and test context, not just its family name.
Selection verdict
Use PLA Matte for attractive indoor prototypes, models and lightly loaded housings. Move to PLA Tough+ for knocks or PETG for a more durable functional baseline.
Printed properties.
HDT at 0.45 MPa; tensile, modulus and unnotched impact in XY. V3.0 TDS; specimens dried and annealed before testing.
| Property | Representative value |
|---|---|
| Density | 1.31 g/cm³ |
| HDT · 0.45 MPa | 58°C |
| Tensile strength · XY | 30 ± 5 MPa |
| Young’s modulus · XY | 1.96 GPa |
| Impact strength · XY, unnotched | 19.2 ± 3.7 kJ/m² |
Published test-specimen data is for comparison only. Orientation, conditioning, processing and geometry can change finished-part performance. Heat-deflection temperature is a standardised test, not a continuous-use rating.
Selection logic.
Practical reasons to choose or avoid this material for a specific part.
Advantages
- Matte surface reduces visible layer lines
- Easy processing and colour choice
- Useful stiffness for low-load indoor parts
Watch-outs
- HDT is only 58°C at 0.45 MPa and 52°C at 1.8 MPa
- Less impact-tolerant than PLA Tough+
- Not an outdoor or chemical-duty default